压力传感器的自动标定技术     

王莉娜  赵先龙  阮锐  严晓明 《海洋测绘》2007,27(4):78-80

针对压力测量设备生产和维护过程中,对关键部件压力传感器标定处于手工操作状态、效率低、操作人员不易掌控、标定结果处置复杂的现状,开发了针对压力传感器的自动标定技术。该技术将计算机控制、智能化、曲线拟合和误差分析引入到压力传感器的标定过程中,大幅度提高了标定的效率和可靠性。经此技术标定过的压力探头,在使用中具有互换性,减轻了数据后处理工作的难度。  相似文献   

Calibration of JASON-1 Altimeter over Lake Erie     

C. Shum  Y. Yi  K. Cheng  C. Kuo  A. Braun  S. Calmant  D. Chambers 《Marine Geodesy》2003,26(3):335-354

This article describes absolute calibration results for both JASON-1 and TOPEX Side B (TSB) altimeters obtained at the Lake Erie calibration site, Marblehead, Ohio, USA. Using 15 overflights, the estimated JASON altimeter bias at Marblehead is 58 ± 38 mm, with an uncertainty of 19 mm based on detailed error analysis. Assuming that the TSB bias is negligible, relative bias estimates using both data from the TSB-JASON formation flight period and data from 48 water level gauges around the entire Great Lakes confirmed the Marblehead results. Global analyses using both the formation flight data and dual-satellite (TSB and JASON) crossovers yield a similar relative bias estimate of 146 ± 59 mm, which agrees well with open ocean absolute calibration results obtained at Harvest, Corsica, and Bass Strait (e.g., Watson et al. 2003). We find that there is a strong dependence of bias estimates on the choice of sea state bias (SSB) models. Results indicate that the invariant JASON instrument bias estimated oceanwide is 71 mm, with additional biases of 76 mm or 28 mm contributed by the choice of Collecte Localisation Satellites (CLS) SSB or Center for Space Research (CSR) SSB model, respectively. Similar analysis in the Great Lakes yields the invariant JASON instrument bias at 19 mm, with the SSB contributed biases at 58 mm or 13 mm, respectively. The reason for the discrepancy is currently unknown and warrants further investigation. Finally, comparison of the TOPEX/POSEIDON mission (1992-2002) data with the Great Lakes water level gauge measurements yields a negligible TOPEX altimeter drift of 0.1 mm/yr.  相似文献   

超短基线声学定位原理及其应用   总被引：11，自引：1，他引：11  

冯守珍  吴永亭  唐秋华 《海岸工程》2002,21(4):13-18

声学定位系统（Acoustic Positioning System)的技术研究和应用开发在现代海洋科学调查中起着重要作用。以挪威Simrad公司的HPR410P超短基线定位系统为例，从几方面讨论了超短基线（Ultrashort Baseline)声学定位系统的原理、应用范围、定位误差来源及其相应的修正方法；通过最大程度地减少误差来提高系统的定位精度，从而获取高质量的海洋科研调查资料。  相似文献   

A survey-based assessment of the Northeast Arctic cod stock     

Korsbrekke  Knut; Mehl  Sigbjorn; Nakken  Odd; Pennington  Michael 《ICES Journal of Marine Science》2001,58(4):763-769

  相似文献   

基于荧光原理的叶绿素a传感器校准方法研究     

《海洋技术学报》2024,(1)

利用传感器对水体叶绿素a 浓度进行原位测量是获取实时、连续、长时间序列数据的重要手段。本文在对RBR 传感器和ECO（Environmental Characterization Optics）传感器进行原理分析和线性度、稳定性、重复性等基本性能测试的基础上，利用单一藻种培养液和2020年南海北部海域现场数据校准传感器，并对新的传感器校准系数进行验证。结果表明：两台传感器使用新系数比原出厂系数的叶绿素a 浓度测量准确度有明显提高。RBR 传感器现场数据校准系数的计算结果与叶绿素a 标准值误差最小，平均绝对误差从1.93 μg/L 减小到0.35 μg/L，平均相对误差从55.1%减小到10.9%；ECO 传感器藻液系数明显优于出厂系数和现场数据校准系数的计算结果，平均绝对误差从1.76 μg/L 减小到0.59 μg/L，平均相对误差从50.3%减小到15.1%。传感器测量准确度的提高，可为海洋环境监测、海洋生态灾害预警等工作获取真实可靠数据提供支撑。  相似文献   

Automated Extraction of a Five‐Year LA‐ICP‐MS Trace Element Data Set of Ten Common Glass and Carbonate Reference Materials: Long‐Term Data Quality,Optimisation and Laser Cell Homogeneity          下载免费PDF全文

David Evans  Wolfgang Müller 《Geostandards and Geoanalytical Research》2018,42(2):159-188

LA‐ICP‐MS is increasingly applied to obtain quantitative multi‐element data with minimal sample preparation, usually achieved by calibration using reference materials (RMs). However, some ubiquitous RMs, for example the NIST SRM 61× series glasses, suffer from reported value uncertainties for certain elements. Moreover, no long‐term data set of analyses conducted over a range of ablation and tuning conditions exists. Thus, there has been little rigorous examination of the extent to which offsets between measured and reported values are the result of error in these values rather than analytically induced fractionation. We present new software (‘LA‐MINE’), capable of extracting LA‐ICP‐MS data with no user input, and apply this to our system, yielding over 5 years of data (~ 5700 analyses of ten glass and carbonate RMs). We examine the relative importance of systematic analytical bias and possible error in reported values through a mass‐specific breakdown of fourteen of the most commonly determined elements. Furthermore, these data, obtained under a wide range of different ablation conditions, enable specific recommendations of how data quality may be improved, for example the role of diatomic gas, the effect of differential inter‐glass fractionation factors and choice of transport tubing material. Finally, these data demonstrate that the two‐volume Laurin ablation cell is characterised by no discernible spatial heterogeneity in measured trace element ratios.  相似文献   

Calibration of cyclic constitutive models by oscillating functions     

Muyiwa Ebenezer Alalade  Binod Kafle  Frank Wuttke  Tom Lahmer 《Geomechanics and Geoengineering》2018,13(2):146-157

Most structures are subjected to more cyclic loads during their life time than static loads. These cyclic action could be a result of either natural or man-made activities and may lead to soil failure. In order to understand the response of the foundation and its interaction with these complex cyclic loadings, various researchers have over the years developed different constitutive models. Although a lot of research is being carried out on these relatively new models, little or no details exist in literature about the model-based identification of the cyclic constitutive parameters which to a large extent govern the quality of the model output. This could be attributed to the difficulties and complexities of the inverse modeling of such complex phenomena. A variety of optimisation strategies are available for the solution of the sum of least-squares problems as usually done in the field of model calibration. However, for the back analysis (calibration) of the soil response to oscillatory load functions, this article gives insight into the model calibration challenges and also puts forward a method for the inverse modeling of cyclic loaded foundation response such that high-quality solutions are obtained with minimum computational effort.  相似文献   

Probabilistic calibration of a coupled hydro-mechanical slope stability model with integration of multiple observations     

Lulu Zhang  Fang Wu  Yafei Zheng  Lihong Chen  Jie Zhang  Xu Li 《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2018,12(3):169-182

Multiple types of responses, such as displacements, ground water level, pore water pressures, water contents, etc., are usually measured in comprehensive monitoring programmes for rainfall-induced landslide prevention. In this study, a probabilistic calibration method for coupled hydro-mechanical modelling of slope stability is presented with integration of multiple types of measurements. A numerical example of a soil slope under rainfall infiltration is illustrated to compare the effects of single and multiple types of responses on parameter estimation and model calibration. The results show that the soil parameters can be estimated with less uncertainty and total uncertainty bounds are narrower with multiple types of responses than with a single type of response. Model calibration based on multiple types of responses can compromise different responses and hence the means and standard deviations of model error are the smallest. A feasible correlation coefficient between soil modulus and permeability can be obtained from model calibration with multiple types of responses and single type of response as long as the responses include displacement data.  相似文献   

顾及大气延迟效应的YG-13A斜距标定   总被引：2，自引：1，他引：1  

邓明军  张过  赵瑞山  李少宁  李建松 《遥感学报》2018,22(3):373-380

针对大气延迟时变误差影响遥感卫星十三号(YG-13A)斜距标定精度的问题,提出利用顾及大气延迟时变误差的斜距标定方法提高其斜距标定精度的策略。首先,利用基于NCEP气象资料和全球TEC数据的大气延迟改正方法来计算各标定景的大气延迟改正量。其次,将各标定景的大气延迟改正量代入斜距标定模型中。最后,在地面布设高精度角反射器控制点的情况下通过顾及大气延迟时变误差的斜距标定模型求解斜距测量系统误差,从而提高和验证斜距测量精度,角反射器控制点的平面和高程精度均优于0.1 m。利用嵩山遥感定标场地区的4组不同拍摄模式下获得的YG-13A卫星影像数据对比试验表明,相较于传统的斜距定标方法,在顾及大气延迟时变误差的情况下,4组数据的斜距改正值离散度均有所下降。利用太原、天津两个区域3景影像验证斜距改正后的精度,最小值为0.55 m,最大值为0.91 m,均值为0.70 m。试验结果证明了顾及大气延迟时变误差的斜距标定方法的有效性和可行性。  相似文献   

Calibration of Infrared Absorption Coefficients for Structural Hydroxyl in Garnet by a Combined Study of Isotope Ratio Spectrometry and Vibrational Spectroscopy     

Lin Zhu  Ren-Xu Chen  Yong-Fei Zheng  Jing Wang  Bing Gong 《Geostandards and Geoanalytical Research》2023,47(1):105-124

An accurate determination of water content in garnet is critical to quantify the transport of water to the deep mantle by the subducted oceanic crust beyond the breakdown of hydrous phases. Fourier transform infrared spectroscopy (FTIR) is the most widely used approach to determine the species and contents of water in garnet. Accurate quantification of OH in garnet requires independent calibration using an external method, as OH absorbance is mineral and composition specific. To obtain the infrared absorption coefficients of structural hydroxyl in garnet, a combined study of spectrometric analyses by FTIR and a method combining a thermal conversion elemental analyser with isotope ratio mass spectrometry (TC/EA-MS) was carried out for fourteen gem-quality natural garnet crystals with variable compositions. The obtained molar absorption coefficients were 9322 ± 338 and 240 ± 26 l mol⁻¹ cm⁻² for grossular- and spessartine-rich garnet and pyrope-almandine garnet, respectively. These results are within the range of previous studies. A new molar absorption coefficient of 689 ± 177 l mol⁻¹ cm⁻² was obtained for pyrope-spessartine garnet. The large variation in the absorption coefficient indicates it is controlled by both garnet composition and OH-absorption bands. The obtained absorption coefficients are only appropriate for certain types of eclogitic garnet, and more studies should be carried out on eclogitic garnets.  相似文献